Looking for:
Logic pro x 10.4.5 release notes free download
It was originally created in the early s as Notator Logic[3] or Logicby German software developer C-Lab which later went by Emagic. Apple acquired Emagic in and renamed Logic to Logic Pro. A consumer-level version based on the same interface and audio engine but with reduced features, called Logic Expresswas also available at logic pro x 10.4.5 release notes free download reduced cost.
Apple’s GarageBand comes free with all new Macintosh computers and iOS devices and logic pro x 10.4.5 release notes free download another application built on Logic’s audio engine. Logic Pro provides software instruments, audio effects and recording facilities for music synthesis.
It also supports Apple Loops — royalty-freeprofessionally recorded instrument loops. Logic Pro and Express once shared many functions and the same interface. Logic Express was limited to two-channel stereo mixdown, while Logic Pro can handle multichannel surround sound.
Logic Express only handled up to audio tracks, depending on system performance CPU and hard disk throughput and seek timewhile, as kogic version It features real-time scoring in musical notation, supporting guitar tablaturechord abbreviations and drum notation.
As of version Audio effects include amp and guitar pedal emulators, delay effects, distortion effects, dynamics processors, equalization filters, filter effects, imaging processors, metering tools, modulation effects, pitch effects, and reverb effects.
Among Logic’s reverb plugins is Space Designer, which uses convolution reverb to simulate the acoustics of audio played in different environments, such as rooms of varying size, or emulate the echoes that might be heard on high mountains.
The application features distributed processing abilities in bit modewhich can function across an Ethernet LAN.
One machine runs the Logic Pro app, while the other machines on the network run the Logic node app. Logic will then offload the effects and synth processing to the other machines on the network. If the network is fast enough i. This allows users to combine the power of several Macintosh computers to process Logic Pro’s built-in software instruments and plug-ins, and 3rd party processing plug-ins. In the United States, its main rivals at the time included Performer and Visionwhereas in Europe its main rivals were Steinberg’s Pro 24 and later Cubase.
Most MIDI sequencers presented a song as a linear set of tracks. However, Notator and Vision were pattern-based sequencers: songs were built by recording patterns which might represent for notew Intro, Verse, Chorus, Middle-8, Outro with up to 16 tracks each, then assembling an Arrangement of these адрес, with up to 4 patterns playing simultaneously at any one time in the song.
When it was released, Notator was widely regarded by both musicians and the music press as one of the most powerful and intuitive sequencing and notation programs available on any platform. After the later introduction of competitor Steinberg’s Cubasehowever, track-based logic pro x 10.4.5 release notes free download prevailed over pattern-based, noets in the eventual greater integration and hybridization of the two methods in later versions of both Cubase and Logic.
The C-Lab programmers left that company to form Emagicand in releaae a new adobe effects cs5 32 bitcrack, Notator Logicwhich attempted to fuse both track- and pattern-based operation but looked much more like track-based sequencers than Notator.
Logkc rich in features, early versions of Logic on the Atari lacked the intuitiveness logiv immediacy of either Cubase or Notator, and never achieved the same success. However, by this time the Atari was becoming obsolete, and part of the reason why Notator Logic had been written from scratch with an object oriented GUI though it shared the same nomenclature as its predecessor was to make it easier to port to other platforms.
The Notator prefix was dropped from the product name and the software became known as вот ссылка Logic. As later versions of the software became available for Mac OS and Windows platforms, and acquired ever more sophisticated functions especially in downlad processing to notse advantage of increased computing power, Logic, together with the rise of the PC, gained popularity again.
Apple acquired Emagic in July This announcement caused controversy in the recording industry with an estimated 70, users having invested in the Windows route not wishing to reinvest in a complete new system. Logic 5 featured significant improvements in user interface, and increased compatibility with more types of computers, operating systems, and a wide range of audio interfaces.
Logic 5. From Logic 6 onwards, the software would only be exclusively available on Mac OS. With Logic 6Emagic added the availability of separately packaged software products that were closely integrated add-ons developed specifically for use with Logic, including software instruments, the EXS sampler and audio processing plug-ins. The Logic 6 package also included the stand-alone program Waveburnerfor burning redbook audio CD standard-compliant Logic pro x 10.4.5 release notes free download masters for logic pro x 10.4.5 release notes free download, relase, that application was considered a free bonus feature; it was not advertised as part of the package and did not include printed documentation.
PDF documentation was included on the installer disc. Apple also released a relezse down version of Logic called Logic Express, replacing two previous versions that filled that position called Logic Silver and Logic Gold. Logic Pro 7 was released September 29, logic pro x 10.4.5 release notes free download Most notably, Apple modified the interface of Logic 7 to look more like a product that was developed by Apple.
Additions to Logic Pro 7 included: the integration of Apple Loops, Distributed Audio Processing a technology for combining the power of multiple computers on a network3 new instruments including Sculpture a sound modeling synth and Ultrabeat a drum synth and sequencerand 9 new effect plug-ins including Guitar Amp Pro guitar amp simulatorand a linear phase corrected version of their 6 channel parametric equalizer.
In total, Logic Pro 7 now included 70 effect plug-ins and 34 instrument plug-ins. Logic Pro was no longer a separate product, although a limited version Logic Express 8 was released on the same day, and remained a separate product. Significant changes were made for Logic 8. Logic Pro 8 was now mainly Cocoa вот ссылка, but still included some Carbon Libraries.
Apple also made changes to ease of use. These include the discontinuation of the XSKey dongleand a streamlined interface. Each plug-in used lobic the channel strip opens in a new window when double-clicked.
Many of the features found in Logic 7 have been consolidated into one screen. Other additions to the new interface included consolidated arrange windows, dual channel strips, built in browsers продолжение здесь that in GarageBand and production templates.
On July 23,Logic Pro 9 was announced. A major new feature included “Flex Time”, Apple’s take on “elastic” audio, which allows audio to be quantized. S were also a number of improvements to audio editing, fulfilled user requests such as “bounce in place” and selective track and channel strip import, as well as an expanded content library including one more Jam Pack. Some of the bundled software, including MainStage 2 and Soundtrack Pro 3, was also improved. As Apple has bundled so connections for autodesk revit 2017 64-bit free software instruments with Logic, it is not likely relfase we’ll see the return of integration with external synthesizer hardware to the Logic platform.
On January 12,Apple released Logic Pro 9. Logic Pro 9. Says Apple “With bit mode, the application memory is not limited to 4GB as with bit applications, so there is essentially no practical limit by today’s standards.
The download was just over MB, and 19GB of optional loops were available as in-app downloads. This version of Logic Pro Studio 9 no longer allowed users to access any microtunings in Scala format other than those provided with the software by Apple. New tools in this release are Drummera virtual session player that automatically plays along with your song in a wide variety of drumming styles and techniques, and Flex Pitcha Flex Time equivalent for pitch editing in audio recordings.
Also, a new “Smart Controls” feature allows logic pro x 10.4.5 release notes free download to map parameters from an array http://replace.me/18453.txt plugins to a single, convenient control interface.
Redesigned keyboards and synths were included, together with new stomp boxes, bass amp and drum kit repease, and a chord arpeggiator. A completely rebuilt sound and loop library was introduced, along with a new Patch architecture.
Logic Pro X also improved track organization by allowing users to group multiple tracks into ‘folder’ like categories e. In addition to this organization, Logic Pro X allowed individuals to trigger ‘solo,’ ‘mute,’ and ‘volume’ controls for each group. Coinciding with the release of Logic Pro X was the release of a logic pro x 10.4.5 release notes free download iPad app called Logic Remote, which allows wireless control of Logic Pro X, including Touch Instruments for playing and recording software instruments as well as tools for navigating, making basic edits and mixing.
Since this release, Logic Pro X runs in bit mode only and no longer works with bit plug-ins. Logic In addition, version In OctoberApple released Logic Pro From Wikipedia, the free encyclopedia.
Digital audio workstation. Not to be confused with Dolby Releaae Logic. This article needs additional citations for verification. Please help improve nohes article by adding citations to reliable sources. Unsourced material may be challenged and removed. November 1, January 13, адрес страницы Retrieved January 21, Retrieved June 10, Retrieved March 9, Mac App Store.
Retrieved November 23, June 14, logic pro x 10.4.5 release notes free download Retrieved August 29, John Ialuna. Retrieved August 9, August 30, Retrieved September 1, Sound On Sound. United Kingdom. Retrieved February 22, Music Technology. Retrieved December 2, There was no timeline, no timeline-based looping of selections, and no logic pro x 10.4.5 release notes free download page. This method was more like a relational database than a modern computer sequencer.
Users programmed various parts, comprising rhythms, chords and melodies, then programmed the order and number of repetitions of each of these parts to form songs. Home Studio. Retrieved April 6,
❿
❿
Logic Pro X is all about huge projects, with or without a Mac Pro – CDM Create Digital Music
The application features distributed processing abilities in bit mode , which can function across an Ethernet LAN. One machine runs the Logic Pro app, while the other machines on the network run the Logic node app.
Logic will then offload the effects and synth processing to the other machines on the network. If the network is fast enough i. This allows users to combine the power of several Macintosh computers to process Logic Pro’s built-in software instruments and plug-ins, and 3rd party processing plug-ins.
In the United States, its main rivals at the time included Performer and Vision , whereas in Europe its main rivals were Steinberg’s Pro 24 and later Cubase.
Most MIDI sequencers presented a song as a linear set of tracks. However, Notator and Vision were pattern-based sequencers: songs were built by recording patterns which might represent for example Intro, Verse, Chorus, Middle-8, Outro with up to 16 tracks each, then assembling an Arrangement of these patterns, with up to 4 patterns playing simultaneously at any one time in the song. When it was released, Notator was widely regarded by both musicians and the music press as one of the most powerful and intuitive sequencing and notation programs available on any platform.
After the later introduction of competitor Steinberg’s Cubase , however, track-based sequencing prevailed over pattern-based, resulting in the eventual greater integration and hybridization of the two methods in later versions of both Cubase and Logic. The C-Lab programmers left that company to form Emagic , and in released a new program, Notator Logic , which attempted to fuse both track- and pattern-based operation but looked much more like track-based sequencers than Notator.
While rich in features, early versions of Logic on the Atari lacked the intuitiveness and immediacy of either Cubase or Notator, and never achieved the same success. However, by this time the Atari was becoming obsolete, and part of the reason why Notator Logic had been written from scratch with an object oriented GUI though it shared the same nomenclature as its predecessor was to make it easier to port to other platforms.
The Notator prefix was dropped from the product name and the software became known as simply Logic. As later versions of the software became available for Mac OS and Windows platforms, and acquired ever more sophisticated functions especially in audio processing to take advantage of increased computing power, Logic, together with the rise of the PC, gained popularity again.
Apple acquired Emagic in July This announcement caused controversy in the recording industry with an estimated 70, users having invested in the Windows route not wishing to reinvest in a complete new system. Logic 5 featured significant improvements in user interface, and increased compatibility with more types of computers, operating systems, and a wide range of audio interfaces. Logic 5. From Logic 6 onwards, the software would only be exclusively available on Mac OS. With Logic 6 , Emagic added the availability of separately packaged software products that were closely integrated add-ons developed specifically for use with Logic, including software instruments, the EXS sampler and audio processing plug-ins.
The Logic 6 package also included the stand-alone program Waveburner , for burning redbook audio CD standard-compliant CDR masters for replication, however, that application was considered a free bonus feature; it was not advertised as part of the package and did not include printed documentation.
PDF documentation was included on the installer disc. Apple also released a scaled down version of Logic called Logic Express, replacing two previous versions that filled that position called Logic Silver and Logic Gold.
Logic Pro 7 was released September 29, Most notably, Apple modified the interface of Logic 7 to look more like a product that was developed by Apple. Additions to Logic Pro 7 included: the integration of Apple Loops, Distributed Audio Processing a technology for combining the power of multiple computers on a network , 3 new instruments including Sculpture a sound modeling synth and Ultrabeat a drum synth and sequencer , and 9 new effect plug-ins including Guitar Amp Pro guitar amp simulator , and a linear phase corrected version of their 6 channel parametric equalizer.
In total, Logic Pro 7 now included 70 effect plug-ins and 34 instrument plug-ins. Logic Pro was no longer a separate product, although a limited version Logic Express 8 was released on the same day, and remained a separate product. Significant changes were made for Logic 8. Logic Pro 8 was now mainly Cocoa code, but still included some Carbon Libraries.
Apple also made changes to ease of use. These include the discontinuation of the XSKey dongle , and a streamlined interface.
Each plug-in used in the channel strip opens in a new window when double-clicked. Many of the features found in Logic 7 have been consolidated into one screen.
Other additions to the new interface included consolidated arrange windows, dual channel strips, built in browsers like that in GarageBand and production templates. On July 23, , Logic Pro 9 was announced. A major new feature included “Flex Time”, Apple’s take on “elastic” audio, which allows audio to be quantized.
There were also a number of improvements to audio editing, fulfilled user requests such as “bounce in place” and selective track and channel strip import, as well as an expanded content library including one more Jam Pack. Some of the bundled software, including MainStage 2 and Soundtrack Pro 3, was also improved.
As Apple has bundled so many software instruments with Logic, it is not likely that we’ll see the return of integration with external synthesizer hardware to the Logic platform. On January 12, , Apple released Logic Pro 9. Logic Pro 9. Says Apple “With bit mode, the application memory is not limited to 4GB as with bit applications, so there is essentially no practical limit by today’s standards. The download was just over MB, and 19GB of optional loops were available as in-app downloads.
This version of Logic Pro Studio 9 no longer allowed users to access any microtunings in Scala format other than those provided with the software by Apple. VoiceOver now announces locator points that are set using Key Commands. VoiceOver now announces the state of the Learn button in Smart Controls. VoiceOver now correctly announces the state of an unarmed record button in the Track Header.
Controls in the Step Sequencer tool bar now reliably retain focus after interactions with VoiceOver. The playhead position is now announced by VoiceOver when the Forward by Transient key command is used. VoiceOver now announces deletion of regions using the delete or backspace key. Accessibility in Step Sequencer is improved. In Controls view, the Dolby Atmos plug-in no longer offers Monitoring Format options that are not possible with the current configuration.
The render modes for Object tracks in the Dolby Atmos plug-in are now maintained when the audio device is changed, or when rearranging the order of tracks in the Track List. Spatial Audio playback for Apple Studio Display speakers is now configured properly. Stopping playback of a multi-channel audio file that only has audio content on one channel no longer shows a spike on all channels of a level meter. Smart Tempo Apply Project Tempo to Region and Downbeat now accurately moves a selected region to the downbeat after the region has been trimmed and moved.
The Move to Beat command now consistently works after the left corner of a region has been adjusted. Preview in the Smart Tempo Editor no longer stops at the end of the cycle range if cycle is turned off during playback. Preview in the Smart Tempo Editor now follows changes made to the cycle range or position during playback. Audio files opened in the Smart Tempo Editor are no longer marked as changed when no edits have been yet performed.
Logic no longer writes tempo information to recorded audio files in the musical grid is switched off or the metronome is not active whole recording. Live Loops Surround files that are converted to the project sample rate when added to a Live Loops cell now play back at the correct pitch when Follow tempo is disabled. Drag and drop of loops or regions below the Output track into the Live Loops grid now creates all cells as expected.
Live Loops cells now account for the Delay parameter in the Track Inspector. Live Loops Cells no longer display missing content warning after missing content is installed. Audio regions created with region repeat within a cell are no longer unexpectedly muted. Creating a Drum Machine Designer pattern region by dragging an audio loop or file to the Track Header now places the pattern region in an empty Live Loops cell instead of the Tracks Area on the track in cases where the Live Loops grid is the only active view.
Audio files imported to a Live Loops cell are now properly rounded to the nearest beat. Fixes an issue where region gain and transpose settings are could be changed when recording a performance into a single Live Loops cell.
Flex Time and Flex Pitch Flex edits are now preserved when recording over a span that encompasses more than one existing Flexed region in Create Take Folder mode. Flexed audio regions in cycle or Live Loops playback now remain in sync with the click in cases where there are closely spaced tempo changes.
Fixes an issue where trimming the left border of a Flex-timed region that has both manual flex markers and is quantized could throw the flex edits out of sync.
The audio waveform display on regions using the Flex Slicing mode now reliably matches the audio output. Flex tempo markers are now updated correctly after a region border is adjusted. Resolves an issue where dividing a region that is using Flex Time could sometimes cause the region to go out of sync. Selecting a Quantize setting in an audio region, Live Loops cell inspector or contextual menu now automatically enables Flex Time mode.
Audio region waveform overviews now consistently update to show changes when regions using Flex Time Slicing mode are split.
Resolves an issue where in certain cases manually inserting tempo markers in the Smart Tempo editor could causes audio artifacts when performing Flex Time edits. Fixes an issue where the audio waveform could disappear or change while editing a region in Flex: Slicing mode.
It is now possible to move a note with the Hand tool in Flex Pitch view without changing its length. Audio waveforms now display correctly on quantized audio tracks in Flex Time: Slicing mode. Audio recordings that should be detected as polyphonic are no longer set to Slicing mode when Flex Time is enabled on a track.
Audio now plays as expected in cases where the channel format of a channel strip that includes an instance of Melodyne ARA does not match the region channel format. Sampler and Quick Sampler Fixes an issue in Sampler where Toggling the One Shot button while a note is being held and loop mode is active could cause the loop to continue playing until the Transport is started. View options settings in Quick Sampler are now retained after the plug-in window has been closed and reopened.
Quick Sampler now offers a command to create a Sampler Track. Resolves an issue where setting the Voice Count for a Group in Sampler could set all other Groups with Zones set to the same Key Range to the same number of voices. The audio quality of Flex Pitched notes in Sampler is improved. Articulations Clicking on a control in the Articulation Editor now reliably selects its row.
The keyswitch trigger mode for articulations now works as expected in the Studio Horns instrument. Touch mode automation now responds correctly when releasing a control in the Binaural Panner. Using the key command Play or Stop and Go to Last Locate Position while writing automation in Latch mode now writes the correct automation as expected in cases where the key command has been customized. Stepped automation is no longer converted to ramps when MIDI Transform is used to shorten the interval between steps.
Fixes an issue where region-based automation on Flex Timed audio regions could move unexpectedly when the left corner of the region is adjusted. When Autoselect Automation in Read Mode is enabled and Automation is visible, the default automation lane for a newly created track is Volume rather than Pan.
Editing Region-based automation while playing now disables Catch as expected. Resolves an issue where automation from certain plug-ins could be written to frozen tracks unexpectedly. Logic now instantly writes all automation necessary changes when loading new AU presets while playing while writing automation. It is now possible to edit Region-based automation on open Take folders reliably.
The Automation view no longer shows Atmos plug-in parameters that cannot be automated. Dividing a region that contains region-based automation no longer causes an unexpected automation point to be added to the right-hand region resulting from the division. Splitting a region no longer deletes Region-based automation points that are at the exact position in the region where the split was performed. The Down Mixer plug-in is now available on the Surround Master channel when the surround format is set to 7.
Fixes an issue where option-clicking the Solo button to activate Exclusive Solo on a muted channel could unmute it when solo is deactivated. The Bypass All Effect Plug-ins key command now works as expected on all selected channel strips in the Mixer. Routing a new send from a channel strip now creates a stereo Aux whether the source channel is mono or stereo.
Fixes an issue where renaming a folder track in the mixer could also rename all other folders. The Sends On Fader menu now remains visible when the size of the Mixer is reduced. The state of the Sends on Faders button is correctly maintained when the Mixer is closed and then reopened. Sort Tracks no longer moves sub-tracks out of Track Stacks. Groups Fixes an issue that prevented automation changes in the same group from being applied to locked tracks.
Resolves an issue where the Track Editor always displayed the contents of the first track in a Group when regions on other tracks from the Group are selected.
Alchemy Adjustments made to the Additive tab of the editor in existing presets are now retained when the preset is saved and then reloaded. Performance knobs that have been assigned to a mod-mapped rate control, then to something else now display values correctly.
The Artist name from the Logic preferences is now written as Sound Designer in user-created Alchemy presets. Alchemy Step Sequencer files now reliably save to the correct default location, instead of the last location saved to generally.
Alchemy now uses tunings as expected when selected before an Alchemy instance is added to the project. The preset Visions of Pyramids no longer outputs an unexpectedly loud audio peak when a note is sustained for a long time.
Alchemy now offers 3 additional Stepped Note Properties that offer new resync and step number options. Alchemy includes overall improvements to root key detection, pitched vs. Drummer and Drum Machine Designer Fixes an issue where loading a new drum kit piece into a subtrack could remove Aux sends from the Drum Machine Designer kit.
Resolves an issue where Drummer regions converted to MIDI regions could play back unexpected kit pieces or articulations. Drum Machine Designer now includes a control to turn off the Filter in Sampler. Resolves an issue where Drummer regions converted to MIDI regions could sometimes trigger unexpected drum kit sounds. Plug-ins Fixes an issue where the Repeater in the Remix FX plug-in could produce audible clicks when playing back in a project with tempo changes.
Resolves an issue where switching from a track using the Mellotron instrument while sustaining notes could cause notes to get stuck. Sculpture correctly uses the project tuning when it is set to High Definition render mode as expected The Compare button now works consistently with third-party Audio Unit plug-ins. It is now possible to make fine adjustments in all of Logic’s built-in plug-ins using the Shift key and a mouse scroll wheel.
Fixes an issue where editing regions on certain Audio Unit software instrument tracks could trigger unexpected sounds. Plug-ins now offer sidechain functionality when Advanced Tools is not enabled. The plug-in window browser in Logic now reliably remains in sync when browsing through Audio Unit plug-in presets using the plug-in’s internal browser The Scale setting in the Channel EQ is now recalled from saved patches and settings.
Going from Controls view to Editor view on the AUDelay plug-in now retains any custom view settings previously made in the Editor view. Custom plug-in names that start with numbers now display correctly.
Names of user presets created by modifying factory presets for AUv3 plug-ins are now displayed correctly. Sorting by Type in the Plug-in Manager window is improved. The Compare function now works with Audio Unit plug-ins. Projects that include the Valhalla Supermassive plug-in no longer show as being edited when first opened.
The Freeze button in ChromaVerb is now dimmed in algorithms that don’t offer the Freeze function. Settings for distortion and overdrive plug-ins are now level-compensated. Track names for Kontakt patches now display as expected. Selecting a row within a pattern region now selects the inspector channel strip for the Drum Machine Designer pad. The order of edit parameters in Step Sequencer sub-rows is now maintained when Pattern Regions are a repeated using Command – R.
Takes and comping Take names now display as expected when a recording is made over a take that has been divided into smaller regions. Saved comps are now maintained as expected when a Take region using Flex Time – Slicing mode is split after a tempo change. Regions created from unpacking a Take folder are now colored according to the Take within the comp. Fades applied within Take folders are now reliably retained after a project is saved, closed, then reopened, or when the Take folder is flattened.
Recording a long audio take over noncontiguous audio regions in a track now places the newly recorded audio as the second take in the resulting Take folder, as expected. Unpacking and then repacking a Take folder now preserves the take numbers as expected. Creating a Take folder by recording over several existing regions now preserves the region names as expected. The name of a selected Take Region is now shown in the Region Inspector.
Playing into a Folder Stack that contains a Drum Machine Designer track that has been duplicated no longer triggers both the original and the duplicated instance of Drum Machine Designer. Key Commands The Solo Lock key command now toggles off solo lock when pressed a second time. Key command sets now switch as expected when switching from US to another input language.
All key commands for settings available in the Region Inspector now work as expected when the inspector is closed. The Customized button in the Key Commands window now lights when a key command that has been edited is selected. There is now a key command for Quantize Off. Patches saved from the Output channel strip in the dual view of the channel strip inspector now load as expected.
Ultrabeat samples that have been moved from the default install location can now be found and loaded. Resolves an issue where installing Sound Library additional content on a system where the Sound Library has been relocated could cause the sound library to stop working. Apple Loops Apple Loops created from regions now include any left corner offset from the source region. Preview in the Loop Browser now works reliably in large projects. Resolves an issue where Apple Loops could sometimes increase in volume unexpectedly if there was a tempo change and the loops has Follow Tempo and Pitch enabled.
Import Track Stacks from other projects now import with the correct levels. The bypass state of all plug-ins on a Drum Machine Designer instance is maintained when it is imported into another project. When importing the Tempo and Marker tracks along with audio tracks from another project, there is no longer a superfluous dialog asking whether the tempo and markers should be imported from the audio files. When importing Aux sends with bus assignments from other projects, the Automatic Bus Assignment setting is now respected.
When importing tracks from a different project in which the audio files cannot be found, it is now possible to skip importing the audio globally. Logic no longer removes a small portion from the beginning of a bit audio track imported from a movie file. The first audio file imported into a project with the Use Musical Grid setting disabled no longer triggers an unexpected Use tempo dialog.
When an audio file is dragged to a track with a different channel format, Logic now shows a dialog offering to change the channel format of the track to match. In the project import window, using the right arrow key or Option-clicking one of the check boxes to select all the options for the currently selected row now selects the Keep Bus Number option as expected. Fixes an issue where Stereo channel strips imported with regions from one Logic project to another could be incorrectly set as mono.
Exported MIDI files are no longer unexpectedly extended. Regions with events to the left of the region start now export properly as MIDI files. Merging stereo audio regions using Bounce and Join no longer unexpectedly creates a mono file when performed on tracks higher than There is now an option to Include Tempo Information when bouncing a project. Fixes an issue where Compressor Output Gain is not accurately rendered in a bounced audio file.
When bouncing a track in place, the pan type is now reliably maintained. Logic Remote Fixes an issue where in Logic Remote, pressing the Mute button on a channel strip from a track that is in a folder could unexpectedly open the Audio Track editor in Logic Pro, and the Mute button now correctly displays the track mute status in Logic Remote. Logic Remote now correctly updates the names of channel strips to reflect changes made in Logic Pro.
Logic Remote now properly displays faders as yellow when Sends on Faders is activated in the project after Logic Remote has connected to the Mac. Logic now immediately adapts the Track Control bar size to zoom changes in Logic Remote. Fixes an issue where Logic Remote would not display faders in the Mixer when scrolling with Sends on Faders enabled in Logic.
The Vintage Organ now supports the Crumar Mojo Classic controller Resolves an issue where parameter labels on Mackie C4 control surfaces in Marker Overlay mode could change unexpectedly when an assignment is changed on another control surface from the same control surface group. Text displays on control surfaces now respond more quickly to changes made in Logic. Using a Mackie C4 control surface to switch the track input mode between stereo and mono for a Summing Stack that is being fed from a Bus no longer also switches the stack to an audio input.
Assigning plug-in insert bypass for a Software Instrument channel strip to a control surface no longer bypasses the insert after the one chosen for the assignment. Fixes and issue where Logic could overwrite a control surface setup if a device that offers LUA script support had instead been manually configured to use the Mackie protocol.
Global Tracks The dialog asking whether to add a time signature change when cutting a section between the locators no longer appears if the Musical Grid is not in use. Impulse Response Utility Resolves an issue where the Deconvolution option in the Edit menu could activate when the open project has already been deconvolved. Pressing Option while the input menu is open now allows all selected channels to be assigned to consecutive inputs.
Audio Device Support The dialog asking whether to use or not use a newly connected audio device now remembers the user choice per device. Undo Copy-dragging a marquee selection now creates a single Undo step. Fixes an issue where adjusting the volume fader on a track that is using a Binaural Panner could create two extra Undo steps in the Undo History. It is now possible to undo tempo changes created by Tap Tempo. Fixes an issue where performing an Undo that shortens the end point of the project could leave the Playhead after the new end point.
The Rename Marker key command now creates an Undo step. The Undo history now correctly displays the undo step for Change Track Color. Undo steps for all selected Pan controls are now reliably created when a pan change is performed on them.
Performing Undo after extracting audio from a movie file no longer causes channel strips to be converted to Aux channels. Varispeed Audio files recorded with Low Latency Mode enabled now show the correct tempo and pitch when played in Varispeed Speed Only mode. Score The Song Title text style in the Score window now properly shows the complete song title in cases where the title starts with a number followed by a period, a space and then 5 or fewer characters.
Clicking the Automation button in the Score now immediately opens the Automation view. Grace notes and independent notes are now visually dimmed as expected when muted. Fixes an issue where pasting into the details section of the Staff Styles window could minimize the window Changes made to the text style in a text box are now immediately visible on existing text.
The automation view in the Score now updates to show changes when the Score is showing a single region. Resolves and issue where the Play button in the Audio Track editor could unexpectedly trigger Live Loop cells as well the regions in the track. Selection of notes in the Piano Roll using the Select same Colored Notes command is now immediately visible. Fixes an issue where the visible area in the Step Editor could jump unexpectedly to the end of the project when editing events with the Pen or Line tool if the region start has been dragged to the right of the first event.
Clicked note events in the Piano Roll now generate sound when the automation view is displaying region-based automation. The playhead in an Event List showing the contents of a Live Loops cell is now in sync with the offset of the cell. Fixes an issue where copying a note to the left of the current region start could also extend the region end to the right.
The Audio Track Editor now shows Flex view by default when opened showing a track that is showing Flex in the Tracks area. Text copied and pasted from list editors now matches the visible columns displayed in the editor at the time it was copied. In the Piano Roll, drag-copying a note within a region no longer unexpectedly changes the region boundaries.
Note Repeat now reliably provides a visible indication in the track that it’s recording. MIDI regions on Drummer tracks now display correctly when region-based-automation is displayed. The individual track zoom setting is now maintained when clicking the separation line between automation sub-tracks. Zooming with the Zoom Tool now displays the correct portion of the Tracks area when automation is visible as expected.
The Audio Track editor now switches to display a newly selected single track reliably. A plug-in window opened while another plug-in window has focus now gets focus as expected.
Nudge by Milliseconds now moves the region or event by the correct amount. Resolves an issue where the Reselect Solo-Locked Regions command could unexpectedly select all regions if Solo is not active. Locked screensets containing only plug-in windows now show the lock indicator beside the screenset number. Clicking regions on protected tracks now selects them when the Marquee Click Zone preference is enabled.
Fixes an issue where the Cut command could unexpectedly work on regions that are on locked tracks. The Select All command no longer omits frozen tracks. The Tuner in Logic is now available when an External Instrument track is selected. Fixes an issue where lasso selected regions could be silent until after the mouse is released in Solo mode. Help tags now consistently appear at the bottom of regions to avoid obscuring the area being edited.
Resolves an issue where a marquee selection could shift by the same amount an Anchor is offset from the region start. Fixes an issue where Markers that were created with snap to grid enabled might continue to snap after Snap to Grid has been disabled. The selected tracks in the Track List now update correctly after Lasso selecting tracks over an existing selection in the Mixer. Fixes an issue where pasting MIDI events into a region that has been shortened could cause the region to unexpectedly lengthen.
Shift-clicking to the left of a Marquee selection to extend it no longer causes the entire selection to move to the right. Help tags no longer obscure Takes while comping in Take folders at certain zoom levels. The Region Inspector now shows the correct mute state for multiple selection of some muted and some unmuted regions.
Dragging the Playhead now moves it in increments according to the current Snap setting. Copying a region from a frozen track to an unfrozen track no longer brings up a dialog asking whether to unfreeze the original track. Fixes an issue where option-clicking a region border while zoomed all the way out could cause the region border to move unexpectedly.
Fixes an issue where double-clicking on a single-track folder would not open the folder to show its contents. The Remove Silence window is now resizable. Resolves an issue where take regions could still play back after deletion if Quick Swipe and Take Editing Click Zones is enabled. The menu item to open the Musical Typing keyboard now remains available when the focused track record button is disabled.
The Beat Mapping view now properly shows audio waveforms when the system display settings are set to scaled with larger text. Splitting a folder containing multiple tracks no longer converts it to a one-track folder if only one of the tracks has regions. No Overlap mode now works when a region’s length is extended into the next region by lengthening the last Flex Pitched note in the earlier region.
Sustain pedal data is now correctly written when recording is started within an existing MIDI region.
Fixes an issue where track pads with Force Touch could vibrate unexpectedly when performing edits at certain zoom levels. Activating a Marquee stripe in the Ruler now deselects currently selected regions. This release also marks the end of the road for Mac OS X The new minimum OS requirement is Under the hood, that means support for up to 56 threads, the kind of massive multiprocessing the new Mac Pro can do. Doing artist relations, you may have a film composer with advanced technical needs and a shelf full of Academy Awards.
Even one user in your user base can be critical. So, think really big track counts — which could be meaningful since even some mid-range CPUs can theoretically churn through a lot of tracks, to say nothing of that shiny Mac Pro tower.
Increased Number of Tracks and Channels, up to: stereo audio channel strips software instrument channel strips auxiliary channel strips external MIDI tracks 12 sends per channel strip. See above: that one user thing.
❿
❿